Kit Review: Kotobukiya – Non-Scale Muv-Luv Alternative – Takemikazuchi Type-00F Mana Tsukuyomi Custom ver 1.5 part 2
Blood-1 to all Bloods! Kill all the BETAs!
Welcome to part 2 of the review for the Kotobukiya – Non-Scale – Takemikazuchi Type-00F ver 1.5 from Muv-Luv Alternative. In the previous part, we’ve talk about the design of the kit and its build quality. And of course, it’s definitely a Kotobukiya release on those aspect. Read the previous part here.
– Articulation: The 1.5 ver of the Takemi is slightly improved over the original, and the Takemikazuchi is one agile boy in the series. We’re going to go over each part of the model kit since all parts are quite different:
> Head: a bit restrictive since the head is quite sharp and thin, so there’s not much room to wiggle around. But you can look up quite a bit and turn around 50 degree each side.
> Torso: The ab-crunch is quite impressive. However, the backpack while fully equipped is quite heavy, so it might be a bit harder to keep it bent. The hip connector with the torso is changed from a ball-joint to a peg, which is much better for the stability of the model. And you can swivel a decent range
> Shoulder & Arm: The most agile part of the kit. The engineering is actually very accurate to the in-uinverse design of the TSF – with various segmented joint to allow for a lot of moment. The shoulder block is on a ball joint that is located on top of the shoulders so it’s easy to move along with the arms. The bicep is also on a separate joint so there’s many room for extension and movement. You can pretty much pose the arms in any way you want. Only thing is the mount-pylons on the back might affect the range if you want to swing the arms back.
> Legs: The knee parts are quite limited, but the knee armor sliding gimmick is pretty cool. The thighs are also solid and maneuverable. Also on the thigh connector, you can cut off some of the black parts to increase the range of movement, but not too much. The feet are also quite articulated as the ankle can be extended and pivoted. The toes are also movable so it’s easy to balance the kit on most surface.
> Jump Unit: The Jump units are on ball-joints and can move around quite nicely. I’s quite pointy though so be careful with your fingers.
> Head: a bit restrictive since the head is quite sharp and thin, so there’s not much room to wiggle around. But you can look up quite a bit and turn around 50 degree each side.
> Torso: The ab-crunch is quite impressive. However, the backpack while fully equipped is quite heavy, so it might be a bit harder to keep it bent. The hip connector with the torso is changed from a ball-joint to a peg, which is much better for the stability of the model. And you can swivel a decent range
> Shoulder & Arm: The most agile part of the kit. The engineering is actually very accurate to the in-uinverse design of the TSF – with various segmented joint to allow for a lot of moment. The shoulder block is on a ball joint that is located on top of the shoulders so it’s easy to move along with the arms. The bicep is also on a separate joint so there’s many room for extension and movement. You can pretty much pose the arms in any way you want. Only thing is the mount-pylons on the back might affect the range if you want to swing the arms back.
> Legs: The knee parts are quite limited, but the knee armor sliding gimmick is pretty cool. The thighs are also solid and maneuverable. Also on the thigh connector, you can cut off some of the black parts to increase the range of movement, but not too much. The feet are also quite articulated as the ankle can be extended and pivoted. The toes are also movable so it’s easy to balance the kit on most surface.
> Jump Unit: The Jump units are on ball-joints and can move around quite nicely. I’s quite pointy though so be careful with your fingers.
– Accessories: TSF has several loadouts with several weapons. The only thing missing from the package is the shield, and EVERYTHING else is included, which is A LOT. The amount of spare parts and legit accessories are the most in any kits I’ve ever built. And here’s the arms dealer list:
– 4 x Assault Cannons: Basically mech-sized P90s. Included is also 4 grenade launcher attachments and 2 barrel extensions. The all 4 cannons config is the Gun Sweeper which basically screams firepower. You can pick between
– 2 x Type-74 PB Blade: huge katanas with an extended hilt-guard.
– 2 x Type-65 PB Knife: combat daggers used for close combat.
– 2 x Arm-mounted Dagger: the forearm guards’ panels can be removed and attach 2 blades to it. It’s a unique weapon of the Takemikazuchis. Which is imo the coolest weapons it has (since every other TSF has the other weapons).
The kit also has 4 pairs of hands: close-fisted, open palm and 2 types of weapon holding hands. There are also extra pylon accessories which we will explain in the gimmick part.
– 4 x Assault Cannons: Basically mech-sized P90s. Included is also 4 grenade launcher attachments and 2 barrel extensions. The all 4 cannons config is the Gun Sweeper which basically screams firepower. You can pick between
– 2 x Type-74 PB Blade: huge katanas with an extended hilt-guard.
– 2 x Type-65 PB Knife: combat daggers used for close combat.
– 2 x Arm-mounted Dagger: the forearm guards’ panels can be removed and attach 2 blades to it. It’s a unique weapon of the Takemikazuchis. Which is imo the coolest weapons it has (since every other TSF has the other weapons).
The kit also has 4 pairs of hands: close-fisted, open palm and 2 types of weapon holding hands. There are also extra pylon accessories which we will explain in the gimmick part.
– Gimmicks: Aside from weapon’s gimmicks, the mount pylon also has some neat tricks. In the series, it is possible for the gun mount to swivel forward under the arms for a reverse-shoulder-cannon style. You can swap out the mount pylons for different parts to replicate that style OR twist it around and do the over the shoulder style. The default mount pylons can also swing up and down with a limited range to simulate the blade-drawing action.
Gallery:
Mazinger Zero first appeared in the manga “Shin Mazinger Zero” and later “Shin Mazinger Zero tai Ankoku Daishogun”. This is the ultimate form of Mazinger Z after releasing 7 Black Boxes stored in its body and gaining a sentient mind. With that powerful statement come with CCS Toys’s take on Mazinger Zero
I.am.Optimus.Prime Does a Transformers have to transform? Well theoretically, they should! But if you want dynamic proportions and posabilities, you might have to make some sacrifices. Flame Toys bring us the best looking and articulated non-transformable Optimus to date.
Continuing the HG INFINITISM lines with the new Mazinkaiser. Following the release of HG Mazinger infinity, Bandai now brings in the big boy with Mazinkaiser from the OVA Mazinkaiser ( 2001 ) into the line .
2021 Good Smile Company DX the gattai dynazenon
Duel Gundam has finally been upgraded with the HGCE version featuring the new Assault Shroud with a design based on an old friend, the Blitz Gundam
The HGCE Infinite Justice Gundam Type-II is a completely refreshed version compared to the old HGCE Infinite Justice. As a result, it comes with some interesting new gimmicks and equipment.
HGCE Mighty Strike Freedom Gundam is the 250th in the mainline HG series. This is the strongest return of Strike Freedom Gundam with a version using the most advanced technology
The RX-78-2 Gundam was the first machine to be produced in a Real Grade kit series 14 years ago. Now, version 2.0 has taken it to a new level with many impressive improvements, especially in the frame.
A constant fan favorite in wishlist, the Wolf Type Zoid König Wolf’s finally joined the HMM Zoids lineup! How does the kit live up to it expectation?
An impressive figure from Moshow that knock it out of the park. Great quality and playability that suits one of the Knight of the Round Table. Sir Lancelot has never looked better before.
The fouth member of Yamato Team – HG Gyan Strom is a grunt suit kit worth experiencing with interesting equipments and gimmicks.
The latest member of the HG SRWOG series, HG Huckebein Mk-III continues to be a high-quality kit following its predecessor, HG Huckebein Mk-II.
The 4th model in the HG 1/100 Macross series, HG YF-21 has shown its own uniqueness with a different design and secondary transform mechanism “High Maneuver Mode”.
HGCE Rud-ro.A is a grunt suit kit worth experiencing from the HGCE Seed Freedom series. Although it does not have many diverse equipment, it still stands out with its Western knight-style design.
The third member of Yamato Team – Gelgoog Menace. Designed based on the famous mobile suit Gelgoog, this kit is an HG grunt suit worthy of experience!
HGCE Black Knight Squad Shi-ve.A is a unique design with the style of western knights and many interesting gimmicks, mainly for some badass melee beatdown.
The first Iron Saga model kit, the Deer Stalker RxR is bringing the big gun (literally) and a big improvement to GSC’s Moderoid line.
A super affordable Evangelion figure that brings a lot to the table, including a well-painted diorama with loads of accessories. Definitely a worthy addition to your collection.
